Wooden beam H20

The MyWood P20 /ex. Rettenmeier/ formwork beam is a high-load-bearing and solid-density beam, manufactured strictly according to the European standard EN13377.

For the MyWood P20 /ex. Rettenmeier/ beams, only selected pine material with fine annual rings is used, e.g. from the middle mountain areas of the High Tatras. Production is carried out in a high-tech installation, with continuous quality control. This ensures that the beam will withstand the high static loads to which it is exposed on the construction site at all times.

MyWood /ex. Rettenmeier/ produces formwork beams with both a three-layer beam of 27 mm (Standard) and a three-layer beam of 31 mm (Premium). The MyWood P20 /ex. Rettenmeier/ significantly exceeds the statically required minimum values ​​for shear force and support reaction and provides the builder with a high degree of safety even under extreme loads.

The beams are marked with a conformity mark, length indication and date of manufacture.

We can produce beams with the customer's logo on request.

Available lengths (in cm):

180 cm
245 cm
265 cm
290 cm
330 cm
360 cm
390 cm
450 cm
490 cm
590 cm